29-Apr-2016 11:29

Case Study: Road map for SIM-card relocation in GSM network

ejointech


An important measure of humanity is a simulation of the physical movement of the card.

You can set up the movement rules in the GoAntiFraud system using the "road map" tool.

In order to create a road map, you should go to the "Config" - "Road Map".

Click on the "Add Road map".

To begin with, you should enter a name for the road map.

You should choose the locations between which the SIM cards will move:

After you have added the locations, you can see the following table:

The table is divided into vertical and horizontal components.

The starting point (the place we are leaving) is located vertically:

The destination is located horizontally (i.e. the place we were going to):

At the crossing of the destination and the starting point, we have to specify the time the card will spend travelling.

For example, if we want a SIM-card to travel from Location 1 to Location 4 for half an hour, the map will be as follows:

Here we have to specify the time (30 minutes in this case):

Please note that you should use the hh:ss format to set the time.

You can also see the changes on the right, which display a visual model of your map:

Consequently, we are creating a road map by forming different routes.

Please note that the rectangles on the crossing of the same locations should remain empty, since there will be no movement in this case:

Once you have created your map, you should save it.

You must also select the created map in the tariff settings.

Using the road map, you can successfully simulate the physical movement of the SIM-card, which is an important indicator of humanity.

corporate
1997
0/5
0
votes

Related Articles

GoAntiFraud

Setting up GoIP Gateways to Work with Elastix. Key Features

16 Jun 2016 08:49
The GoIP gateways are well proven as equipment for GSM traffic termination. The good functionality of the devices is successfully combined with their attractive price. To successfully start a business using the GoIP-gateways, you should set up the equipment. We will look at how to connect the gatewa...
GoAntiFraud

How to Solve a Problem of Losing GSM Gateway Channels When Terminating

03 Oct 2016 09:50
Many terminators are faced with the loss of GSM gateway channels. This is especially true of inexpensive Chinese equipment. For a while, all the channels are functioning properly, and then some of them start "falling off" with an arbitrary frequency, that is, they lose registration in GSM networks. ...
GoAntiFraud

Automatic Downtime Alerts GoIP-gateway

11 Jan 2016 15:12
Suppose, you go shopping or get stuck in a traffic jam for a few hours. At the same time, your GoIP-gateway has failed and ceased to terminate. You do not have enough time to get to your server VoIP and fix the problem. As a result, you are losing money and credibility on the part of the orig...
GoAntiFraud

GoIP-gateways

18 Nov 2015 12:30
GoIP-gateways allow you to combine the VOIP-telephony system, GSM, and IP-based network. The device allows you to save money on mobile communications and make international calls at local rates of a mobile operator. Moreover, the gateway can be connected to a bank of SIM-cards and provide the commun...
GoAntiFraud

Case Study: Lists of numbers as a protection against carriers calls

22 Apr 2016 14:21
What are lists of numbers for?As you know, some operators make calls to users’ SIM-cards in order to block them. This is called "carrier’s calls"The GoAntiFraud system has a mechanism that helps users to create lists of numbers that protect their SIM-cards against the carrier’s calls.This tool a...
GoAntiFraud

Start of Work With VoIP Equipment

22 Aug 2016 15:08
Beginners, who are familiarizing with VoIP technologies, do not yet know many nuances of the organization of the Internet telephony. Some of them are willing to save and connect the Huawei 3G modem of series E1550, E160g, E173, and E1752C. But, according to experts, it is better to install the gatew...
GoAntiFraud

Case Study: Traffic distribution with Carriers setup

15 Apr 2016 14:59
To diversify areas of your calls, GoAntiFraud makes "Carriers" settings available. All you need to do is to go to Config-> Carriers tab and create a possible direction for the call.To create a direction, you need to specify the area code and the number of digits.You can also add or remove digit...

GoAntiFraud

GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud
GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud